Daily Maintenance Of Coolers

Coolers are mostly made of calcium, magnesium ions and acid carbonates because the cooling water contains calcium, magnesium ions and acid carbonates. When cooling water flows through the metal surface, carbonates are generated. In addition, the oxygen dissolved in the cooling water will also cause metal corrosion and form rust. Due to the generation of rust, the heat exchange effect is reduced. In severe cases, cooling water has to be sprayed outside the shell. When the scale is serious, the pipe will be blocked, making the heat exchange effect ineffective. Research data shows that scale deposits have a huge impact on the loss of heat transfer. As the deposits increase, the energy cost will increase, saving energy, extending the service life of the equipment, and saving production time and costs.
For a long time, traditional cleaning methods such as mechanical methods (scraping, brushing), high-pressure water, chemical cleaning (pickling), etc. have many problems when cleaning equipment: they cannot completely remove scale and other deposits, acid causes corrosion to the equipment to form holes, and the residual acid causes secondary corrosion or under-scale corrosion to the material, which eventually leads to the replacement of equipment. In addition, the cleaning waste liquid is toxic and requires a lot of money for wastewater treatment.
Use Fushitech cleaning agent to clean the condenser. Fushitech is efficient, environmentally friendly, safe and non-corrosive. It not only has a good cleaning effect but also does not corrode the equipment, which can ensure the long-term use of the condenser. Fushitech cleaning agent (with unique added wetting agent and penetrant, can effectively remove the most stubborn scale (calcium carbonate), rust, grease, mud and other sediments produced in water-using equipment, and will not cause harm to the human body, and will not cause erosion, pitting, oxidation and other harmful reactions to materials such as steel, copper, nickel, titanium, rubber, plastic, fiber, glass, ceramics, etc., which can greatly extend the service life of the equipment.