Gasketed Plate Heat Exchanger For HVAC

Gasketed Plate Heat Exchanger For HVAC

Optimized corrugated plates: high heat transfer efficiency, compact footprint, lower space and energy use
Fully detachable frame: easy disassembly, manual inspection and CIP cleaning, less downtime
Multiple plate/gasket materials: for fresh water, seawater, oil, acids and food-grade media
Custom thermal layout, port size and connections to meet project needs - Factory-direct, fully pressure and leak tested: for bulk orders, OEM and distributor programs

Product Introduction

Hylita Gasketed Plate Heat Exchanger | Efficient, Detachable & Custom Industrial

 

Hylita gasketed plate heat exchanger detachable unit

Hylita Gasketed Plate Heat Exchangers for HVAC are engineered as flexible, serviceable heat transfer equipment for industrial and commercial thermal projects. The detachable frame allows full inspection and in-place cleaning, a key advantage for food-grade hygienic lines and scaling-prone media. We offer custom sizing, material selection and flow configuration based on your exact heat duty, fluid media and temperature-pressure requirements. As a factory-based manufacturer, we support OEM private labeling and export-ready supply for system integrators, distributors and end-factory operators. Submit your working condition to receive a thermal calculation and tailored quotation.


 

 
 
Core Benefits
Diagram showing turbulent flow on corrugated heat exchanger plates for high heat transfer
01.

High Heat Transfer Efficiency

he corrugated plate profile of Hylita gasketed plate heat exchangers creates turbulent fluid flow across the heat transfer surface, lifting thermal exchange rate while maintaining a compact equipment footprint. This design reduces overall heat transfer area requirements and lowers continuous energy consumption for heating and cooling cycles. It helps project engineers fit the heat exchanger into limited plant space and cut long-term operational energy expenditure for district energy, process cooling and waste heat recovery systems.

02.

Fully Detachable & CIP Cleanable Construction

Hylita GPHE adopts a bolted detachable frame, allowing operators to open the plate pack without specialized heavy tools for inspection, cleaning and gasket replacement. The design supports CIP cleaning cycles, which is essential for dairy,beverage and hygienic food production lines that require regular sanitation. Easy disassembly reduces planned maintenance downtime and avoids costly process shutdowns caused by fouling buildup on
heat transfer surfaces.

 

Detachable plate heat exchanger being opened for inspection and CIP cleaning

 
Heat exchanger plates and different rubber gaskets for corrosive and hygienic media
03.

Broad Material & Gasket Compatibility

Hylita provides flexible material selection for plate packs and sealing gaskets to match diverse process media. Stainless steel 304 and 316L suit standard water and food fluids;titanium and Hastelloy serve seawater, brine and corrosive chemical duties. NBR, EPDM and Viton gaskets cover different temperature and chemical resistance ranges. This flexible material matrix prevents corrosion and gasket degradation, lowering leakage risk for aggressive industrial fluids.

04.

Custom Thermal Configuration & OEM Support

Instead of forcing projects into fixed standard models, Hylita engineers each GPHE layout around your heat duty, inlet/outlet temperature, operating pressure and flow constraints.We adjust plate quantity, pass arrangement and connection port size to fit existing piping layouts. Our factory also supports OEM and ODM service for heat exchanger distributors and system manufacturers, including private labeling, custom drawing supply and tailored packaging for resale.

**** Engineer designing custom plate heat exchanger layout for OEM project
 

**** Sealing structure schematic to avoid fluid cross-contamination in plate heat exchanger

05.

Reliable Sealing to Prevent Media Cross-Contamination

Each gasket forms an independent sealed channel between adjacent plates, isolating hot and cold fluid circuits inside the Hylita plate pack. Every unit receives mandatory hydrostatic pressure and leakage testing before shipment to verify sealing integrity. This robust sealing structure eliminates cross-mixing risk between process fluids, which is critical for food production, chemical processing and closed-loop cooling systems where fluid
contamination leads to product loss or safety hazards.

06.

Cost-Efficient Factory Supply for Project Budgets

Hylita operates as a direct manufacturer of gasketed plate heat exchangers, removing multi-layer distributor markup typical of premium international heat transfer brands. Our units maintain comparable thermal performance and compliance documentation while supporting controlled project budgets for EPC contractors and system integrators. This cost advantage is especially valuable for large bulk orders and repeat procurement programs for industrial thermal projects.

Hylita factory production workshop for gasketed plate heat exchangers

Technical Specifications

 
Parameter Specification
Product Type Gasketed Plate Heat Exchanger (GPHE)
 Max Design Pressure 1.0–2.5 MPa
 Max Design Temperature  -20°C ~ 180°C 
 Plate Material Options SS304, SS316L, Titanium
Gasket Material Options NBR, EPDM
Heat Duty Range 10 kW to 8,000 kW
Plate Area Range 0.1 m² to 1,000 m² 

 

 
 
industry applications
product-649-444

HVAC & District Energy

Used for district cooling/heating, geothermal and solar heat recovery, separating primary and secondary circuits; compact footprint and easy maintenance.

product-682-423

Food & Beverage / Dairy

Used for milk pasteurization, beverage cooling and process heat recovery; fully openable plate pack supports CIP sanitation.

product-652-412

Chemical & Biogas

Used for lube oil cooling, seawater heat transfer and process cooling; marine classification certification available on request, seawater corrosion resistance and reliable sealing.

product-549-381

Pulp, Mining & Industrial Waste Heat Recovery

Recovers waste heat from process water and machinery cooling circuits for make-up water preheating or facility heating; robust sealing and fouling-resistant plates.

 

Ordering & Custom Design Process 
product-400-200

Step1 

 

Submit Working Condition Data:

Share your heat duty, fluid media, inlet/outlet
temperature, working pressure, flow rate and material preference. This core thermal data is required for accurate engineering calculation.

image.png

Step2 

 

Thermal Calculation & Layout Proposal:

Our heat transfer engineer runs thermal simulation to recommend plate area, pass arrangement, material grade and gasket type. A preliminary layout drawing and specification sheet will be prepared for your review.

 
64x64

Step3 

 

Production & Inline Quality Control:

Plate cutting, stamping, frame assembly and gasket fitting are completed in our factory. Inline dimensional inspection checks plate pack alignment and clamping structure.

64x64

Step4 

 

Mandatory Pressure & Leakage Test:

Every finished unit is pressurized and leak-tested before packing. Test records can be attached to shipment documents on request.

64x64

Step5 

 

Export Packaging & Shipment:

Units are packed in seaworthy export cases,with manual, drawing and spare gasket kit included as agreed. OEM private label marking is applied if specified.

64x64

Step6 

 

After-Sales Technical Support

After delivery, our engineering team provides remote installation guidance and gasket replacement instruction. Warranty service covers manufacturing defects for the agreed period.

 

5c656213801448b1a30c044b62e49971.jpg
 
 
Why Choose Us

Hylita is a dedicated gasketed plate heat exchanger manufacturer with in-house plate stamping, frame fabrication, assembly and test workshops. We operate as a factory direct supplier rather than a trading intermediary, giving project buyers and distributors access to transparent pricing and direct technical communication with thermal design engineers. Our production workflow is built for both standard stock units and custom-engineered GPHE for non-standard thermal duties.

 

We accept small trial orders and bulk project orders, with flexible MOQ starting from one unit. Sample units can be arranged for performance validation before large-scale rollout. Our team prepares export-ready documentation, including commercial invoice, packing list and test records, to support global shipment. We also maintain stable supply chains for raw plate and gasket materials to support repeat, long-term procurement programs for our distributor partners.

 

FAQ

Q: What is a gasketed plate heat exchanger?

A: A GPHE is a detachable heat exchanger made of stacked corrugated metal plates and sealing gaskets clamped in a steel frame. It separates hot and cold fluids for efficient heat transfer. The bolted frame allows full disassembly for cleaning and maintenance, unlike welded models.Hylita GPHEs are widely used in industrial heating, cooling, and waste heat recovery.

Q: What applications is this GPHE suitable for?

A: This GPHE suits HVAC, dairy/beverage pasteurization, chemical cooling, biogas, marine, and mining waste heat recovery. It is ideal for hygienic CIP lines or projects requiring corrosion resistance and compact space. Our engineers can confirm suitability based on your fluids and working conditions.

Q:  Are the listed technical specifications confirmed performance data?

A: Some parameters (pressure, temperature, heat duty) are reference benchmarks only. Final specs depend on your duty, media, material, and layout. All performance data must be verified by thermal calculation and factory test reports before tender or final order confirmation.

Q: How should I confirm the correct model and specification for my project?

A: Please submit your full working condition data: heat duty, fluid media, inlet/outlet temperature, operating pressure, flow rate, and material requirements. Our engineers will then run a thermal simulation, recommend the plate layout and materials, and provide a general arrangement drawing for your review.

Q: Do you support OEM and ODM service for gasketed plate heat exchangers?

A: Yes, Hylita provides full OEM/ODM services for distributors, thermal skid makers, and system integrators. We offer private labeling, custom nameplates, neutral packaging, and custom gasket kits. We also manufacture per your drawings and specs, supplying English documentation for your clients.

Q: What is your MOQ for gasketed plate heat exchangers?

A:  Our suggested MOQ is 1 unit. This policy supports small trial orders, single-site retrofit projects, and pre-project sample validation. For large bulk orders, we offer volume-based pricing adjustment and priority production scheduling for project buyers and distributors.

Q:  What is the standard lead time for GPHE orders?

A: Stock models ship in 4–10 working days. Custom units (requiring thermal calculation and special materials) take 10–15 working days after drawing approval. Exact lead times are stated in your quotation and depend on order quantity and material availability.

Q: Can you provide custom packaging and private label marking?

A: Yes, our OEM service includes custom packaging and private labeling (neutral wooden cases, custom nameplates, and branded documentation). Just provide your artwork and packaging requirements with your inquiry, and we will confirm feasibility before production.

Hot Tags: gasketed plate heat exchanger for hvac, China gasketed plate heat exchanger for hvac manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag