9.52mm Air Conditioner Condenser With Copper Tubes Aluminum Fins Coil

Finned tube heat exchangers are a core part of our lineup. They're widely used across many industries, specifically for air and gas processing. We offer round, oval, and square finned tubes to fit any setup. Whether you need a direct replacement or a custom design built from scratch, we've got you covered.

Advantages of Finned Tube Heat Exchanger:

1. 50% Higher Efficiency: Optimized contact for maximum thermal output.

2. Space-Saving Build: Ultra-compact design for tight equipment spaces.

3. 24/7 Heavy-Duty Stability: Consistent performance under high loads.

4. Fully Custom Specs: Tailored dimensions and layout for any project.

5. Zero-Leak Reliability: Precision brazing with 100% strict leak testing.

Heat Exchanger is assembled of tubes, fins and plates.

TUBES:

We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper, stainless steel and cupronickel. The tube expansion, during the flaring phase, allows a perfect contact between the tubes and the fins and as a consequence it assures efficient thermal exchange.

FINS:

The fins, made of aluminium, prevarnished aluminium or copper, are pressed by means of a particular ondulation that increases the thermal exchange between the air and the fin reducing the load losses on the air side and encouraging at the same time the flow of condensation or defrosting water. The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments. The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.

PLATES:

Thanks to its accurate three-dimensional design and to modern punchers and numerical control bending machines, it is possible to make carpentry and structures of different sizes that can be adapted to any construction requirement of the customer.

Standard packaging is wooden crates.
For exports to European countries, the wooden crates undergo fumigation treatment.
If container space is limited, we can switch to PE film packaging or accommodate special packaging requests from customers..

With 18 years of strategic partnership, we have successfully designed, manufactured, and exported heat exchangers to over 50 countries worldwide.
Customer feedback consistently confirms that actual cooling performance aligns precisely with theoretical design values.
We can provide detailed drawing after your order.We can also provide Custom services.

Since 2015, Shenzhen Hylita have been a dedicated manufacturer and global exporter of industrial heat transfer equipment, including Evaporators, Condensers, Air coolers,Finned tube heat exchanger,Dry cooler,economizers and other heat transfer equipments

Shenzhen Hylita is a company specialized in R&Dand production of various heat exchangers, is a high-tech production and service in heat exchangersystem design and complete set of equipment solutions.Shenzhen Hylita provide high quality products and energy efficient industrial solutions for HVAC, power,metallurgy, chemicals, power machinery and food etc.

Shenzhen Hylitahas developed the capability to manufacturecoils with a wide range of materials including copper, brassCu-nickel, aluminum,carbon steel, hot-dip galvanized steelTitanium and stainless steel.

1.. Quality Control
Q: How do you ensure the quality before shipment?
A: Our reputation is built on 4 core quality pillars
✅ Experience : Specialized manufacturer since 2015 (10+ Years).
✅ Certifications: ISO 9001:2015, CE, ROHS
✅ Assurance : 100% pressure testing on every unit before shipment
✅ Global Trust : Successfully serving clients in over 50+ countries.

2. Design & Calculation
Q: No drawing? Can you design for me?
A: Yes! We use HTRI software for precise sizing. Just share your operating data (Temp/Flow), and we will provide a professional design for your approval.

3. Minimum Order Quantity (MOQ)
Q: What is the MOQ? Can I place small order please ?
A: Small order is also welcome in our company.

4. Warranty Service
Q: How long is the warranty coverage?
A: We offer flexible warranty options to match your needs:
✅ Standard: 12-Month for all orders.
✅ Extended: Up to 24-Month for eligible customized orders (confirm with our team).

5. Customization
Q: Do you support OEM/ODM and custom branding?
A: Yes, full customization available. We support custom materials (Copper, SS304/316, Cu-Ni) and offer Laser Marking & Nameplates to feature your logo perfectly.

6. Service Commitment
Q: How do you keep me updated on my order?
A: We ensure 100% Process Transparency
✅ Double Confirmation: All specs verified before production starts..
✅ Visual Updates: We send photos/videos of the manufacturing progress.
✅ Document Review: Draft documents (B/L, Invoice) sent for your approval before final issuance to avoid errors.

7. Main Products
Q: What are your main products ?
A: We mainly produce air heat exchangers, surface coolers, evaporator coils, condenser coil, shell and tube heat exchangers, plate heat exchangers and other heat exchange equipment and all kind of finned tubes, heat exchange accessories, etc.

Hot Tags: 9.52mm air conditioner condenser with copper tubes aluminum fins coil, China 9.52mm air conditioner condenser with copper tubes aluminum fins coil manufacturers, suppliers, factory